Air conditioning repairs in Melbourne are easy if you know what to do. Many times, it is as simple as replacing a heating or cooling unit with a newer one that has worked properly for years. Sometimes the unit needs to be taken apart in order to be cleaned inside and out. It is important to have all of this done as soon as possible to prevent the problem from getting worse and causing more expensive damage.
When your air conditioning unit malfunctions, the first thing you need to do is determine what kind of problem it is. Has it stopped cooling? Has it over-heated? Is the AC unit dirty? Once you have determined which type of problem your AC unit is dealing with, you will be able to fix it more quickly and effectively.
A broken air conditioning unit is never repairable. You will have to replace the entire unit with a new one. There is nothing that can be done about the wires inside of the unit. They must be replaced and the wires need to be run new so that the system will work as good as new again.
Before calling a professional, make sure that you know the exact model and make of the air conditioning unit that you have. You do not want to call another company and end up with a different model, even though the cost might be cheaper. Even air conditioning parts can vary slightly between models. Not all companies stock all models, so you will have to take that into consideration when calling for the diagnosis. The last thing you need is to purchase an air conditioning unit only to find out that you cannot return it because it does not work, even though it came with the company’s specifications.
There are certain steps that you can take in order to prevent any costly air conditioning repairs. When it becomes necessary to replace the air conditioning unit, try to find the exact same model that you bought. Some companies specialize in certain brands or types, so it is best to find one that is able to repair your unit. If your air conditioning unit uses a refrigerant to cool your home, replace the condenser coils in the unit with ones from a different brand. This should drastically reduce your electric bill each month.
It is important to keep your air conditioner well maintained in order to save money on repairs. Make sure that you change out the filter at least once a month to get rid of dust and other debris that could potentially damage your unit. If you notice that your air conditioner has stopped running, call the manufacturer immediately. There are many options available, and it will only cost you less than $20 to fix your problem.
If you live in an area that has a winter climate, you should keep your air conditioning unit shut off when it gets too cold outside. Turn it down before you leave the house, and remember to put it back on when you return. Leaving the unit on can cause damage to the motor, and cause problems with your home. This is especially true in areas where there is snow or ice. If it is difficult to start the motor, try plugging the circuit breaker for the unit instead.
If you do not have these simple safety tips, it is likely that you will get into bigger troubles than you thought. You could experience a short circuit in the process or even have the whole unit fall apart. There are some businesses that will come to your home and perform air conditioning repairs for one flat rate. You may need to bring in more than one unit, but this is usually cheaper than calling a professional.
Extrodinair provides the best air conditioning repairs in Melbourne. Get in touch with us today for split system installation Keilor.